Jump to content
Sign in to follow this  
Getafix

Help a noob set up his first tank!

Recommended Posts

Getafix

Advice needed: how do I wash off mineral turp residue from glass?

long story short: mucked up silicone sealant for the tank partition and had to use mineral turp to remove some of the sealant. Also had to use some metho. I've cleaned the surface with water and lots of wipes. Anything I can do to ensure I've removed as much of these stuff as possible?

Share this post


Link to post
Share on other sites
jayc

Turps is an oil based product.

You'd have to use detergent. Rinse, then maybe clean it twice.

Then make sure you have removed as much of the detergent as possible.

Rinse, rinse again, and then maybe one more time.

Sorry, I'm not much help. I don't get turps on an aquarium very often. But I use it to clean paint brushes, some times, and lots of detergent works.

  • Like 1

Share this post


Link to post
Share on other sites
Wilzee83

Hi! I've got pretty much the same set up. And remarkably just starting it up as well.

my set up consists of:

-Komoda 4ft bookshelf 

-Eheim 2215 filter

-Pro Z light.

-CO2 injection.

-Eheim jäger 100w

i've got Mr Aqua soil but in hindsight, I would have gotten Amazonia just like yourself.

I also am using an xy-380 sponge which cost about 10 bucks and an air pump. As mentioned by Ozshrimp, it's highly beneficial as it will oxygenate the water and provide bacteria for your shrimp to eat off. Another alternative to oxygenate the water is to use an oxydator. I've used this in my crs tank before and noticed more babies surviving in my cube tank.

If you want to grow HC successfully, you may need a 2nd pro z light along with CO2. It just doesn't feel suffice having just 1 pro z light.

With regards to CO2 injection,I have a normal disc diffuser but I've heard good things about inline diffusers. It will be more economical as you require injecting less co2 for the same results. 

You still need to cycle your tank which may take 4 - 8 weeks (I think?). YouDon't need to consider getting a chiller just yet as summer will be over in a couple of months and I presume you won't be filling your tank with precious invertebrates till you cycle your tank? One other plus is that you can CO2 inject the crap out of your HC in the interim. Well, that's what I'm doing with assistance from my fighting fish to quicken the cycle.

I also want to pay kudos to Jayc on awesome write up as it will be helping me set up my tank.

Getafix, I feel like I'm going on the same journey as yourself as I pretty much bought the same spec stuff! Lol. 

Good luck and happy shrimp breeding!

Will

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • sdlTBfanUK
      By sdlTBfanUK
      This is a very good video on the basics if you are new to shrimps. It is called 'How to breed shrimp', not sure why as it is generally everything and a very good  and clear video guide?.
       
    • Brooohm
      By Brooohm
      Hello SKF. 
      I have never owned or held shrimp before, but i have been inspired alot by ecospheres, or very basic shrimp enclosures. I would love to make a tank, which is mostly self independant (like a small ecosystem), that also means that i would love to be without filter. But im in a need of some knowledge first. Do you guys have any advice? My thoughts so far:

      A bowl or something like that as the tank.
      A lamp for heat/light
      Let my tank cycle for a couple of weeks before adding shrimp.
      Plants, am i fine taking some from my local pond? Also, do i need a source of algae first? Like a mossball.
      Substrate, again, am i fine taking some from my local pond? Also, what kind of substrate? Gravel, dirt?
      At last the shrimp, what kind? Is theyre saltwater, how does that work with the plants?
      If there is anything i havent talked about, some heads up is gladly welcomed :) 

      Thanks in advance.

       
    • Ishtarduzzie
      By Ishtarduzzie
      Hello SKF readers!
      To save me starting multiple threads and also so I know here to find answers I am doing a journal/question thread.

      If I put this in the wrong spot JayC/mods then feel free to move it or tell me to re-make :D
      Sorry.... this WILL be long probably and I appreciate any time you take to read and answer my questions!
       
      So, on Thursday (edit: tomorrow now according to an email from AU Post) I have a package coming from The Tech Den with a Aquael Shrimp Set Smart 30 and a few other goodies.
      My plans so far are:
               Iron sand (found posts saying shrimp when ok with it).... May need more than the 2kg I initially got...?          An amazing piece of Gold Vine that I found at my local pet store          The light and filter (modified) from the kit with the heater only being used in winter if needed          Filtered water (RO maybe? It is a 2 canister counter top carbon and sediment drinking water filter gifted by my mum a few months ago. Unsure brand etc) with JayC’s DIY remineraliser              IAL and alder cones         Some ceramic hidey holes         API GH/KH and Master kits         TSD pen - Xiaomi Professional TDS Meter from eBay Still need:
                 TDS pen as I forget to check the pet store and Tech Den were out – Recommendations?           Plants           Shrimp – Would like blue dreams and maybe glass shrimp           Fish – Big IF! I am worried about eating all the baby shrimp. Spotted rasbora since they are sooo tiny if any. So, according to the local store the light from the kit is pretty good and I have seen quite a few good things about the filter around YT and such. I was thinking of modifying it like this with a single though: https://youtu.be/I_ckQpO8GBo
      My old 16L (does not fit in spot and wary of using for fish since it housed mice) has been a bit of a dummy test on water temps and for the last week has been in a safe range. None of these have been 40+ days though so I will probably need to air-con or get a cooler for coming into next summer.... or something (nowhere near planned this part since should be cooling off by time cycled).
      So... to break up some questions that relate to the ‘still need’ list:
      -          I was thinking plant wise Anubias nana petite, Java fern narrow (still need to source somewhere to get... not sure local store has anything other than plain) and.... a moss...
      I was hoping for something less stringy than Java moss. It is just so..... wild lol
      Fissiden sp. ‘Vietnam’ and Mini Pellia are calling to me but are slow growers and needs med-high light and I think Co2... filter has a Co2 option if needed.... but NO clue what a 6w, 8000K LED translates to on a nano tank... and I guess that would depend on other planting...
      Also pondering about Peacock and Phoenix? But probably similar problem....
      Maybe I should just wait for if I get a bigger tank.... for anything other than Java lol *sighs*
      -          Sourcing blue dream shrimp! Your trade section does not seem to get many responses lol
      My local has glass shrimp (Australian... soooo Paratya australiensis?) who looked blue tinged at least, cherry red and cherry yello but no source of cherry blue.
      Would appreciate sources to get from Newcastle or Sydney! Gumtree makes me hesitate though I have found people with them up on there. One seems a safer bet but maybe not as easy to get to. A second one has potential and very easy for me to get to for Newcastle (no car).
      -          Now... going with plants that don’t need a planted substrate.... should I still actually go with an actual buffering/planted substrate for bacterial reasons...? Should I add hidden biomedia sock or anything like that since the bacteria won’t really colonise in a thin layer of sand, unlike a planted tank.
       
      Starting to get into the excited but freaking out I am doing something to mess it up bad stage.
      Blue dreams are more expensive than I was wanting to be learning on... but if I get red cherries that would just mean another tank later lol
    • revolutionhope
      By revolutionhope
      Hi all,
      I am in need some advice, I've no experience with plumbing whatsoever (with the exception of using canister filters with chillers if that counts) so please bear with me if my questions seem silly or obvious!
      I came across 2 cheap 4 foot tanks with holes drilled already in the base of them that I am hoping to use. There are only a couple of minor scratches here and there and the only damage is on a back corner where the bezel is chipped - I intend to silicone this inside and out to be safe.
      Anyway I have a few points that I'd really love help to address.
      - How best to plumb these 2 sitting at the same height and integrate a sump.
      - Is it feasible to use 2 eheim canisters with a my chiller connected to a sump? When I only ran one canister the flowrate was not quite enough and the chiller was turning on and off too frequently as a result. Do I have to just bite the bullet and fork out money on a pump instead?
      - Opinions on how best to divide the setup into several bays for different colonies. Currently I am looking at following Paul Minett's lead using tropical flyscreen which has less than 0.4mm aperture but he has told me there is still the occasional fugitive baby.
      Thanks in advance, once I actually start doing anything on this setup I will post the progress in a journal here. Once again NB I am totally clueless so I'd appreciate it if you could dumb down your suggestions for me :-)
      Love and peace
      Will
       




    • cipas
      By cipas
      Hello guys,
      I want to build a shopping list for a nano cube shrimp tank and I kindly ask you to give me some feedback. So here it is:
      Tank: Aquael Shrimp Set Smart 30,
      Substrate: Shirakura
      Plants: Eleocharis parvula, Taxiphyllum barbieri, Echinodorus bleheri
      Also someone sugested a substrate filter.
      Can you help me fill the list with all the required stuff that I need. This is my first tank.
      Thanks in advance!
       


  • Must Read SKF Articles

  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Posts

    • jayc
      Ahhh ... the age old question of how to trigger your shrimp to breed. We will have to assume you have at least 1 male. What are you feeding them? Feed frozen bloodworms twice a week. The additional protein will give them more energy. Add more Indian Almond Leaves (aka Cattapa leaves) to the tank to promote more tannins and biofilm. Try raising temps to 23C or 74F. A 10% water change might help the females moult.
    • jayc
      No it won't have all the minerals needed for plants. SS GH/KH+ is made up of Calcium carbonate, Magnesium.   Anubias is a slow growing plant, so it does not need much fertilisers. Mosses will grow with out any added ferts. Hairgrass and whatever you have in the back corner will survive without added ferts. Give it CO2 while your tanks is empty of shrimps.    Aim for 4-6 GH.  
    • Newday
      Hello, again.  I really appreciate everyone's wisdom on this topic.  Since I last posted, I lost my 29 gallon tropical freshwater aquarium to a sudden leak. 😞  Thankfully, I was able to save and rehome all the fish.  But, that means my 7 gallon shrimp tank received an upgrade wrt live plants and gravel.  I was hoping that would inspire some mating behavior, but I actually witnessed a female discharging what must be unfertilized eggs just this evening.  The male shrimp (I thought I had two, but now I'm questioning the other's sex after some weeks) is not doing his job and I can't figure out why.  I had to siphon out 50% of the water to move it from it's prior location beneath the 29 gallon.  I have not performed another water change in the nearly 3 weeks since the leak happened.  I check the parameters in the 7 gallon once a week and ammonia, nitrate, and nitrite are 0ppm.  Temp remains at a steady 72 degrees.  The shrimp are as active as ever but that male is unexcited by a tank full of females.  No clue what to do next.😑
    • DEL 707
      I'm thinking of ordering that "Salty Shrimp - Shrimp Mineral GH/KH+". My only concern is, does it also have all the needed minerals for my plants? Edit - If I was to use my tap water, what kind of GH should I be aiming for?
    • sdlTBfanUK
      WOW, that's hard water all right! Amazing how different it is to mine as probably only about 25 miles between us???? You were right to use RO water so at least you have a good starting point from here in! The PH may be the biggest issue as remineralising with a shrimp specific GH/KH+ will sort everything else with RO water. Cherry shrimps are pretty tough and adaptable so will tolerate PH below 7 but the nearer you can get to 7 the better, and a long time acclimating the shrimps using a dripper (there is a tube with regulator sold by ProShrimp for about £10 I think if you don't already have something) will be needed! The soil will take longer to loose its PH buffering ability with the RO though! There are a number of ways you can go from here: 1) RO water plus a GH/KH+ and try to get the PH up somehow although you will be fighting the Soil until that exhausts its buffering ability. 2) You could mix RO and (dechlorinated) tap water at 3:1 and then use a GH+. I do a 50/50 'similar' (half tap water, half brita filtered water) on my oldest tank. can't even remember why but I believe in 'don't try and fix it if it isn't broken' so have just carried on ever since. The mixed water would start at PH 6.2, TDS 70(ish), GH just over 4, KH just under 4 and then you can mineralise it (GH+ only) for the rest. This will exhaust the soil buffering quicker than 1 above and you will save a bit on RO water, use less (about half as much) mineraliser etc. You may think this is a bit too fussy a route though, and the soil will still buffer anyway, just not for as long as all RO water, and when it stops buffering you will have a PH closer to the ideal for the shrimps. Probably where you are now I would just get the snails for now until you have stopped adjusting the water or at least decided where next, probably not much longer before you get shrimps. I would also try turning off the CO2 and just see if it is really needed, if it looks like it is you can easily turn it back on then, but shrimps will do better without it and it MAY not be needed, same for fertilisers??? At least you are doing all this before getting the shrimps, very smart as most of us have learnt the hard/wrong way................ Simon
×
×
  • Create New...