Jump to content

Lighting question


ineke

Recommended Posts

  • HOF Member

i have an Aqua one 980 with lighting built into the hood. I wanted to replace the hood and get an LED system but my tank measures 99 cm so it's an awkward size. I know there are lights available that cover 90-120 cm - can anyone recommend something- I mainly have mosses and Java fern so don't need plant strength lighting.  The other thing I wondered is there an adapter that would allow me to use my hood but with  LED tubes ? There are 3 tubes in the hood at least 2 different sizes - I need to pull it apart to check out the fluro sizes and haven't done that yet but 2 tubes died this week so perfect time to replace or upgrade.

Link to comment
Share on other sites

I would recommend the Up AQUA Pro Z or even the U series if you eventually want to grow serious plants. Can't comment on whether they would fit exactly on your tank given its odd size but with my 60cm pro z on my 60cm tank, I have to keep the legs inside the dimensions of the light so it will sit on the tank (hope that makes sense). If not, you could always suspend the light on wire from a frame. I'm pretty sure @NoGi built a cool frame for his lights using box metal from Bunnings.

 

  • Like 1
Link to comment
Share on other sites

Ineke,

i fit an UP Aqua Pro Z into my AR126 hood. 

So a 90cm  Pro Z would fit your AR980 hood.

but the old light fittings need to be gutted and removed first.

A drill bit and a hack saw might be needed to cut the plastic hood, to fit the power plug through, but its not difficult for a home DIY handyperson.

  • Like 1
Link to comment
Share on other sites

  • HOF Member

Thanks guys . I'm not going to grow serious plants - I had beautiful leafy plants growing in that tank but took most out so I could see the shrimp. I Ve been down the home made LED lighting but even with the highest rating I could buy the light didn't get to the bottom of the tank - it's very wide and very deep . I have Aqua one plantglo lights in my shrimp room and I'm happy with them so I might take one of those and see how it looks on the tank. I thought there was an adaptor that would allow LED tubes to be used if I decide to keep the hood. I only have half the hood on as I don't use the overhead filter that came with the tank and would prefer it gone altogether because it holds a lot of heat in on hot days even with the lights off. 

  • Like 1
Link to comment
Share on other sites

  • HOF Member

I have order the Aqua u series light from Newbreed aquatics. I have gone for an oversize - 120cm - as the 90 cm isn't quite long enough. I don't want to use the hood so this is the best solution . Thanks for your input.

Edited by ineke
  • Like 2
Link to comment
Share on other sites

  • HOF Member

I received my light yesterday and WOW it is very bright. I can see bits of my tank I could never see before. Taking the hood of the Aqua one made a big difference in itself but the light is fantastic. I do have good LED plant lights in my shrimp room but they are no where near as good as these. As the tank is very deep and very wide I thought there would still be dark spots but it's great. The shrimp were stunned for a while LOL but they have plenty of hiding places. Funny thing is they are out even more than before.

  • Like 1
Link to comment
Share on other sites

  • HOF Member

Here are the before and after shots. I miss the look of the hood but the tank is staying much cooler. I need some better before pictures -will see what I can find.

image.jpg

image.jpg

image.jpg

image.jpg

image.jpg

Here is another before picture but with a different setup

image.jpg

It doesn't really show how much difference there is unfortunately but it's a huge difference

Link to comment
Share on other sites

  • 1 month later...

I'll have to post some pics of mine, same tank but with a maxspect glaive, love the coverage and the adjustability of the LED's mine is the 1m model

  • Like 1
Link to comment
Share on other sites

1d17fe1e86855f0d0dd4004e0c391d11.jpg

This is my 980 with the glaive.... Get nice pearling with my current custom settings.

95384a2655eee583d0c21d4cdcb1e6bf.jpg

Video showing some of my custom presets

https://vimeo.com/151371778

And the general use 60-80% mix with no green channel. This is the most used.

e84384ae83cf0a46ace2f8f379db5e64.jpg

  • Like 1
Link to comment
Share on other sites

e84384ae83cf0a46ace2f8f379db5e64.jpg

 

Is that a crinum? It looks amazing! Some day I'll get one when I can afford it. Haha.

What's affordable?

Link to comment
Share on other sites

What's affordable?

I think crinums are selling for around $50-$120 depending on size. They are still out of my price range. I think the most expensive plants I have bought are around $20. I'm a poor man. Haha.

Similarly I would love to get a Madagascar lace but they are even more expensive and I don't think they could be propagated.

I used to live in Singapore where Madagascar lace cost me $12 each. That was a while ago though. Still it is ok to dream couldn't I. Haha.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • beanbag
      Update to say that after a few gravel vacs, front wall scrub, moss / floating plant trim, that the condition seems to have improved.  My current theory is that it is due to waste / debris management, where "stuff" like that brown mulm accumulates in the substrate and behind the HMF filters.  Maybe some tanks can somehow deal with it, but mine can't.  Also another experienced shrimper suggested that maybe those "shell bugs" don't just live on the shrimps but also in this debris.  Maybe this is the reason some tanks fail due to "old tank syndrome" where all they need is a good gravel vac? Also, I am guessing that plant trim helps too because now more of the nutrients and light go into growing algae instead of more plants? Well anyway for this tank I will try weekly water change and monthly gravel vac / plant trim.  For my next tank, I'm thinking of something like an under-gravel system where this mulm can fall down and I vac it out.
    • sdlTBfanUK
      Good to have an update and good to hear you are getting shrimplets, so hopefully your colony will continue and you may not get to the point where you have to cull some to stop over population. These type of shrimp only live 12 - 18 months so the adult deaths may be natural? If you have the time I would do weekly 25% water changes, adding the new water via a drip system and do some vacuuming clean of the substrate each week, even if only a different bit each week! See if that helps in a few months and if it does then stick with that regime? It should help reduce any build-ups that may be occuring!
    • beanbag
      Hello again, much belated update: The tank still has "cycles" of 1-2 month "good streaks" where everybody seems to be doing well, and then a bad streak where the short antenna problem shows up again, and a shrimp dies once every few days.  I am not sure what causes things to go bad, but usually over the course of a few days I will start to see more shrimp quietly standing on the HMF filter, and so I know something is wrong.  Since I am not "doing anything" besides the regular 1-2 week water changes, I just assume that something bad is building up.  Here's a list of things that I've tried that are supposed to be "can't hurt" but didn't prevent the problem either: Dose every other day with Shrimp Fit (very small dose, and the shrimp seem to like it) Sotching Oxydator Seachem Purigen to keep the nitrates lower Keeping the pH below 5.5 with peat Things that I don't do often, so could possibly "reset" the tank back to a good streak, are gravel vac and plant trim, so maybe time to try those again. One other problem I used to have was that sometimes a shrimp would suddenly stop eating with a full or partially full digestive tract that doesn't clear out, and then the shrimp will die within a few days.  I suspected it was one of the foods in my rotation - Shrimp Nature Infection, which contains a bunch of herbal plant things.  I've had this in my food rotation for a few years now and generally didn't seem to cause problems, but I removed it from the rotation anyway.  I don't have a lot of adult Golden Bees at this point so I can't really tell if it worked or not. Overall the tank is not too bad - during the good streaks occasionally a shrimp will get berried and hatch babies with a 33-50% survival rate.  So while there are fewer adults now, there are also a bunch of babies roaming around.  I guess this tank will stagger on, but I really do need to take the time to start up a new tank.  (or figure out the problem)
    • jayc
      If that is the offspring, then the parents are unlikely to be PRL. I tend to agree with you. There are very few PRLs in Australia. And any that claim to be needs to show proof. PRL genes have to start as PRL. CRS that breed true after x generations doesn't turn it into a PRL. Neither can a Taiwan bee shrimp turn into a PRL despite how ever many generations. I've never seen a PRL with that sort of red colour. I have on Red Wines and Red Shadows - Taiwan bee shrimps. So somewhere down the line one of your shrimp might have been mixed with Taiwan bees and is no longer PRL. It just tanks one shrimp to mess up the genes of a whole colony. 
    • sdlTBfanUK
      Sorry, missed this one somehow! The PRL look fantastic and the odd ones look part PRL and part Red wine/Red shadow in the colour. They are still very beautiful but ideally should be seperated to help keep the PRL clean if you can do that.  Nice clear photos!
×
×
  • Create New...